Horizontal API Single-Stage Double-Suction 304 316L Stainless Steel Industrial Chemical Refinery Centrifugal Oil Transfer Gas Petrochemical Process Pump for CE

Product Description

Product Description

Kangqiao Horizontal API Single-Stage Double-Suction 304 316L stainless steel industrial Chemical Refinery Centrifugal Oil Transfer Gas Petrochemical Process Pump for CE

 

Product standard
GB/5657-1995;ISO9906-1999;GB/T13007-1991

Product series
KS-X, KS-XF, KS-XW, KS-XM type single-stage double suction four series


Application range and product feature

KS-X type pump is a single-stage double-suction, horizontal open centrifugal pump for conveying clear water and liquids similar to water in physical and chemical properties, suitable for water supply and drainage in factories, mines, cities, power stations and circulating water stations, agricultural irrigation and water conservancy projects, the inner surface of the pump casing, impeller, shaft sleeve, sealing ring and other over-flow parts can be coated with Beltrona to further improve the pumping efficiency.

KS-XF type pump is single-stage double-suction, horizontal open corrosion-resistant centrifugal pump, the parts in contact with the medium can be stainless steel, for conveying corrosive media or corrosive media with physical properties similar to water, suitable for chemical industry, petroleum, metallurgy, power station, food, synthetic fiber and other industries or municipal sewage treatment system.
 

KS-XW type pump is a single-stage double-suction, horizontal center-opening centrifugal sewage, slag slurry pump. The pump overflow channel has been redesigned, the flow channel is spacious and not easy to be blocked, for conveying sewage, slag mud slurry with fiber or other suspended matter, applicable to the main process of factories, mines, cities, power stations, food, paper, synthetic fibers and other industrial or municipal wastewater treatment system.

KS-XM type pump is single-stage double-suction, horizontal open wear-resistant centrifugal pump, the pump impeller, shaft sleeve, sealing ring and other wear parts are made of wear-resistant materials or the inner surface of the pump casing and the surface of the pump over-flow parts are made of special wear-resistant spraying, which can effectively prolong the service life of the parts, and it is suitable for the occasions of chemical factories, mines, power stations, water conservancy, farmland irrigation and so on, where the conveying medium contains mud and sand or there are crystallized materials. Design point performance parameters and external dimensions are exactly the same as KS-X type, supplying caliber from φ250-φ800.

Series of pumps product model notes
 

The outer wheel is cut by the first

Nominal head is 65m 

KS-X double suction clear water centrifugal pumps
KS-XF double suction corrosion resistant centrifugal pumps
KS-XW double suction sewage, slurry, mud pumps
KS-XM double suction wear-resistant centrifugal pumps


Pump inlet diameter of 250mm

Performance parameters of the table

Company Profile

 

 

 

 

 

Our Advantages

Why Choose Junfu Pump

) Excellent quality, competitive price, prompt delivery, on-time service and good reputation.
) Low minimum order
) We offer knowledgeable tech support before and after the sale.
) We pass the authentication of ISO,API,CE.

Service Policy
         Junfu's Warranty Policy are provided by Jiangsu Kangqiao Electromechanical Equipment Technology Co., Ltd and cover defects in workmanship and materials. 

         The goods provided by the seller must ensure that they fully comply with the requirements of the contract and are suitable for the intended use in design and construction; Must meet or exceed all performance values and tolerances; The goods must be tested in accordance with the provisions of the contract and its attachments to demonstrate their ability and compliance with the technical specifications and performance data.
If the goods or any part thereof cannot comply with the provisions of the contract, the seller must remedy the defect and/or inspect and retest the goods for the buyer free of charge, without any financial restrictions, and must complete the work within the time agreed upon by both parties. If the goods cannot be remedied or corrected, the buyer has the right to reject the goods. In this case, the seller must replace the rejected goods or replace them with suitable goods to meet the requirements of the contract. The replacement work must be completed within the delivery time that cannot exceed the originally agreed contract delivery date.
The seller must implement an effective quality assurance system during the organizational process, which has the same requirements as those specified in the IS09000 series 2000 edition. The products provided must comply with the requirements of the HSE management system standard, which is 0SHA180001/HSEo
The warranty period for the 4 pumps is 18 months from the date of shipment or 12 months after operation. During this period, if any manufacturing quality issues occur, the supplier will replace the parts free of charge. If any pump malfunctions occur due to the buyer's reasons, the supplier will also provide timely assistance in handling them. The supplier guarantees that the warranty period for the replaced parts is one year.

Payment Term

Payment Terms	T/T	EXW	50% T/T in advance, the balance to be paid before dispatch
		FOB
		CIF	50% T/T in advance, the balance to be paid against the copy of B/L
		CFR (C&F)
	L/C	Irrevocable L/C at sight could be accepted if amount above US $50,000.00
Delivery Time	30-45 days after receiving advanced payment

 

FAQ

1. When can I get the quotation?
We usually quote 24 hours after we get your inquiry. If you are very urgent to get the price, please call us or tell us in your e-mail so that we will regard your inquiry priority.

2. Can you do the design for us?
Yes. We have a professional team having rich experience in design and manufacturing. Just tell us your idea and we will help to carry out your ideas. It does not matter if you do not have someone to complete files. Send us high resolution images, your logo and text and tell us how you would like to arrange them. We will send you finished files for confirmation.

3. What about the lead time for mass production?
Honestly, it depends on the order quantity and the season you place the order. The lead time of MOQ is about 30 to 45 days(Except for the selected brand).Generally speaking, we suggest that you start inquiry two months before the date you would like to get the product at your country.

4. What is your terms of delivery?
We accept EXW, FOB, C&F and CIF, etc. You can choose the one which is the most convenient or cost effective for you.