General Electric Centrifugal Deep Suction Spray Water Pump for Tee Plantation.

Product Description

Product Description

Kangqiao Horizontal Special Centrifugal Pump For  Styrene-butadiene Rubber Industry

Product standard
API610 / GB3215-1982

Patent product
ZL0126252702, 20042007841303
 

Product introduction 
KXG type centrifugal pump with small flow and high head, KXG-X type non-clogging self-priming pump for rubber powder and KLJB type slurry pump are the new products developed by our company in view of the situation of the booming development of the domestic rubber industry, the introduction of the relevant advanced technology from Japan, and the combination of the actual condition of the pumps used by our company in the rubber industry (Patent No.: ZL0126252702, 20042007841303). 


Product feature

Features of KXG pump
1, pump structure science. Pump flow (Q) minimum amount of only 0.2mh, the total head (H) up to 120m, which is other centrifugal pumps can not reach the performance. (Flow s0.2m'/h, while the head ≥ 85m, the pump body and other parts are equipped with water cooling devices, etc.).
2, according to the working conditions of the media temperature and corrosion, toxicity and other specific circumstances to determine the pump selection. Such as: medium temperature ≥ 200C can be used to support the center of the KXG pump, using API610 standard cooling, flushing program.
3, with stable performance, safety, environmental protection and other advantages.
4,The pump has low maintenance rate, and it is easy to disassemble and install when it needs repair or maintenance.
5,The design and manufacture of this series of pumps are in accordance with AP1610 standard and GB3215-1982 standard.

 

KXG-X-type pump features:
1, rubber industry production of sewage contains glue powder, transported by general centrifugal pumps, self-priming pumps, often due to the glue powder is easy to bond in the pump cavity and affect the normal operation of the pump, resulting in an increase in the power of the motor, or even force the pump can not run, and so on. To solve this practical problem, only often dismantle the pump glue (sometimes a few days to dismantle a wash), or the use of imported self-priming pumps, which is very labor-intensive, labor-intensive, and often affect the production. If the use of imported pumps, the price is high, maintenance is also difficult. And KXG-X-type rubber powder non-clogging horizontal self-priming pump, is specifically designed to solve the rubber industry, conveying slurry clear or rubber powder containing the production of sewage, easy to bond the difficult problem and the design, manufacture, performance and Japan's imported pumps are similar. Used by the practice, the pump runs, the rubber powder is not easy to bond, is other centrifugal pumps, self-priming pumps can not be compared. Of course, the pump runs for a long time, also need to be dismantled, maintenance (generally 1-2 times a year).
2, the pump structure is complex, but scientific and reasonable. Smooth running, safety, environmental protection.
3, the pump seal can be mastic (liquid) packing or mechanical seal.
4,The design and manufacture of this series of pumps are in accordance with API610 standard.

 

Features of KLJB pump.
1,Rubber industry production process conveying "slurry clear", but also general centrifugal pumps are difficult to handle. Only KLJB type slurry pump is a special pump for transporting slurry in rubber production. The series of pumps using the rear open structure, disassembly cleaning, maintenance, as long as the back of the pump cover is removed, the pump rotor and so on all out, cleaning, maintenance and convenience; while the pump cavity volume is large, and open impeller, not easy to be slurry clear bonding. Even if sometimes need to remove part of the bonded material, but also more convenient, will not be like other centrifugal pumps that are frequently disassembled and laborious.
2,Pump running smoothly, safety, environmental protection, high efficiency, energy saving.
3,The design and manufacture of pumps are in accordance with API610 standard.

 

Application range
petroleum, chemical, light industry, metallurgy, pharmaceutical, papermaking, electric power, environmental protection and other industries, conveying low or high temperature media, neutral or corrosive liquids.

Pumping medium
Inorganic and organic acids such as sulfuric, nitric, hydrochloric and phosphoric acids at various temperatures and concentrations.
Alkaline solutions such as sodium hydroxide and sodium carbonate at various temperatures and concentrations.
Various salt solutions
Various liquid petrochemical products, organic compounds, and other corrosive media.
Rubber industry's production of sewage (containing rubber powder, particles) and other industry's sewage rubber industry's "slurry clear" or other media of similar nature.

KXG    0.2   --  80                                    KXG-X      100 --  80  --  160  B                                       KLJB    125 -- 315



Performance parameters of the table

Company Profile

 

 

 

 

 

Our Advantages

Why Choose Junfu Pump

) Excellent quality, competitive price, prompt delivery, on-time service and good reputation.
) Low minimum order
) We offer knowledgeable tech support before and after the sale.
) We pass the authentication of ISO,API,CE.

Service Policy
         Junfu's Warranty Policy are provided by Jiangsu Kangqiao Electromechanical Equipment Technology Co., Ltd and cover defects in workmanship and materials. 

         The goods provided by the seller must ensure that they fully comply with the requirements of the contract and are suitable for the intended use in design and construction; Must meet or exceed all performance values and tolerances; The goods must be tested in accordance with the provisions of the contract and its attachments to demonstrate their ability and compliance with the technical specifications and performance data.
If the goods or any part thereof cannot comply with the provisions of the contract, the seller must remedy the defect and/or inspect and retest the goods for the buyer free of charge, without any financial restrictions, and must complete the work within the time agreed upon by both parties. If the goods cannot be remedied or corrected, the buyer has the right to reject the goods. In this case, the seller must replace the rejected goods or replace them with suitable goods to meet the requirements of the contract. The replacement work must be completed within the delivery time that cannot exceed the originally agreed contract delivery date.
The seller must implement an effective quality assurance system during the organizational process, which has the same requirements as those specified in the IS09000 series 2000 edition. The products provided must comply with the requirements of the HSE management system standard, which is 0SHA180001/HSEo
The warranty period for the 4 pumps is 18 months from the date of shipment or 12 months after operation. During this period, if any manufacturing quality issues occur, the supplier will replace the parts free of charge. If any pump malfunctions occur due to the buyer's reasons, the supplier will also provide timely assistance in handling them. The supplier guarantees that the warranty period for the replaced parts is one year.

Payment Term

Payment Terms	T/T	EXW	50% T/T in advance, the balance to be paid before dispatch
		FOB
		CIF	50% T/T in advance, the balance to be paid against the copy of B/L
		CFR (C&F)
	L/C	Irrevocable L/C at sight could be accepted if amount above US $50,000.00
Delivery Time	30-45 days after receiving advanced payment

 

FAQ

1. When can I get the quotation?
We usually quote 24 hours after we get your inquiry. If you are very urgent to get the price, please call us or tell us in your e-mail so that we will regard your inquiry priority.

2. Can you do the design for us?
Yes. We have a professional team having rich experience in design and manufacturing. Just tell us your idea and we will help to carry out your ideas. It does not matter if you do not have someone to complete files. Send us high resolution images, your logo and text and tell us how you would like to arrange them. We will send you finished files for confirmation.

3. What about the lead time for mass production?
Honestly, it depends on the order quantity and the season you place the order. The lead time of MOQ is about 30 to 45 days(Except for the selected brand).Generally speaking, we suggest that you start inquiry two months before the date you would like to get the product at your country.

4. What is your terms of delivery?
We accept EXW, FOB, C&F and CIF, etc. You can choose the one which is the most convenient or cost effective for you.