Kangqiao Vertical Acid Clean Water Circulating Anti-Corrosive Chemical Centrifugal Boiler Feed Axial Flow Coal Sewage Liquid Natural Gas Pump with ISO/CE

Product Description

Product Description

kangqiao Centrifugal Axial Flow Pump for Chloride Evaporation Forced Circulating with ISO/CE

 

Conform to design standard of GB/T13008
Flow range: 45~90m³/h
Lift range: 400~1600m
Design pressure: 2.5~7MPa
Application temperature: -130~260ºC
Application field: In the field of small flow and high lift, it can replace reciprocating pumps and multistage centrifugal pumps, and can be widely used in petroleum, chemical, electric power, metallurgy, papermaking, pharmaceutical, food, environmental protection and other fields.

Product feature
(1)High efficiency
KGSB high-speed pump adopts gear speed increase, which greatly improves the speed of the single-stage pump and the specific speed of the pump, so that the pump can still have high efficiency in the field of high head and small flow. The single-stage structure reduces the mechanical loss and volume loss caused by the large number of stages of the multistage pump.
(2)Stable performance
KGSB high-speed pump has simple structure, small axial size of the pump, easy to ensure the strength and rigidity of the shaft, and has a stable speed increase system and a good lubrication system, so as to ensure the smooth operation of the pump and have good reliability. KGSB high-speed pumps can be made of different overflow parts materials, such as single seal, "back-to-back" double seal, "Shenlian" double seal, etc., and can also be equipped with various auxiliary pipeline systems (flushing pipelines, cold pipelines), so they can be used to transport various media under various working conditions.
(3)Simple structure, easy installation and maintenance
KGSB series high-speed pump, there are two vertical basic structure and three horizontal structures, except KGSB-W4 are single-stage single-suction structure, its floor space pump parts are less interchangeable, maintenance is simpler than multi-stage pump, maintenance personnel do not need special training.


Product instruction

Chart

1	spline shaft	2	oil seal	3	low speed shaft	4	glide bearing	5	filterforgas discharge	6	high speed gear
7	high speed shaft	8	glide bearing	9	rotating ring (for gear casing)	10	stating ring compon-ent(for gear casing)	11	shaft sleeve	12	sealcasing
13	Casing	14	lmpeller	15	Inducer	16	lock washer	17	rotating ring (for pump)	18	separate plate
19	stating ring component (for pump)	20	iddle sleeve	21	oil filter	22	throttle liner sleeve	23	throtle sleeve	24	tank for down gear
25	inneroilpump	26	ball bearing on thelow speed shaft	27	lowspeed gear	28	ankfor upper gear	29	ball bearing on the low speed shaft

 

 

Product Parameters

Performance parameters of the table

 

 

Company Profile

 

 

 

 

 

Our Advantages

Why Choose Junfu Pump

) Excellent quality, competitive price, prompt delivery, on-time service and good reputation.
) Low minimum order
) We offer knowledgeable tech support before and after the sale.
) We pass the authentication of ISO,API,CE.

Service Policy
         Junfu's Warranty Policy are provided by Jiangsu Kangqiao Electromechanical Equipment Technology Co., Ltd and cover defects in workmanship and materials. 

         The goods provided by the seller must ensure that they fully comply with the requirements of the contract and are suitable for the intended use in design and construction; Must meet or exceed all performance values and tolerances; The goods must be tested in accordance with the provisions of the contract and its attachments to demonstrate their ability and compliance with the technical specifications and performance data.
If the goods or any part thereof cannot comply with the provisions of the contract, the seller must remedy the defect and/or inspect and retest the goods for the buyer free of charge, without any financial restrictions, and must complete the work within the time agreed upon by both parties. If the goods cannot be remedied or corrected, the buyer has the right to reject the goods. In this case, the seller must replace the rejected goods or replace them with suitable goods to meet the requirements of the contract. The replacement work must be completed within the delivery time that cannot exceed the originally agreed contract delivery date.
The seller must implement an effective quality assurance system during the organizational process, which has the same requirements as those specified in the IS09000 series 2000 edition. The products provided must comply with the requirements of the HSE management system standard, which is 0SHA180001/HSEo
The warranty period for the 4 pumps is 18 months from the date of shipment or 12 months after operation. During this period, if any manufacturing quality issues occur, the supplier will replace the parts free of charge. If any pump malfunctions occur due to the buyer's reasons, the supplier will also provide timely assistance in handling them. The supplier guarantees that the warranty period for the replaced parts is one year.

Payment Term

Payment Terms	T/T	EXW	50% T/T in advance, the balance to be paid before dispatch
		FOB
		CIF	50% T/T in advance, the balance to be paid against the copy of B/L
		CFR (C&F)
	L/C	Irrevocable L/C at sight could be accepted if amount above US $50,000.00
Delivery Time	30-45 days after receiving advanced payment

 

FAQ

1. When can I get the quotation?
We usually quote 24 hours after we get your inquiry. If you are very urgent to get the price, please call us or tell us in your e-mail so that we will regard your inquiry priority.

2. Can you do the design for us?
Yes. We have a professional team having rich experience in design and manufacturing. Just tell us your idea and we will help to carry out your ideas. It does not matter if you do not have someone to complete files. Send us high resolution images, your logo and text and tell us how you would like to arrange them. We will send you finished files for confirmation.

3. What about the lead time for mass production?
Honestly, it depends on the order quantity and the season you place the order. The lead time of MOQ is about 30 to 45 days(Except for the selected brand).Generally speaking, we suggest that you start inquiry two months before the date you would like to get the product at your country.

4. What is your terms of delivery?
We accept EXW, FOB, C&F and CIF, etc. You can choose the one which is the most convenient or cost effective for you.